January 31, 2024

What is the IATF16949 Automotive Quality Management System?

The International Organization for Standardization (ISO) announced an industry-wide quality system requirement in March 2002. Its full name is "Quality Management System - Special Requirements for the Organizational Implementation of ISO9001 for Production Parts and Related Service Parts in the Automotive Industry". For IA/TF16949. In response to the ISO9001:2015 quality management system, the standard was updated to IATF16949:2016 in 2016. System Effect 1. Streamline company management processes and improve corporate performance; 2. Improve product quality and str

January 31, 2024

How should we choose mold from three types?

Plastic injection mould, the abbreviation of a combined plastic mold used for compression molding, extrusion, injection, blow molding and low foam molding, injection mould can be divided into three categories according to the different types of pouring systems: (1) Edge Gate injection moulding: The runners and gates are on the parting line and are demoulded together with the product when opening the mold. It has the simplest design, is easy to process, and has low cost. Therefore, more people use the edge gate system to operate. (2) Pin-point Gate injection mouldi

January 31, 2024

We will participate in the 2024 National Plastics Industry Exhibition (NPE 2024)

Exhibition Time: 6-10 May 2024 Exhibition Location: Orange County Convention Center, Orlando, Florida, USA Held Period: Every three years Sponsor: American Plastics Industry Association, SPI [Exhibition Introduction] NPE is the largest and oldest plastics exhibition in the United States and the second-largest plastics industry event in the world. It is undoubtedly the gold medal exhibition in t

January 31, 2024

Case Analysis of the Advantages brought by using Hot Runner Molds

Using a Hot Runner can bring you higher returns 1. The use of hot runner saves more costs. The higher the material price, the more waste materials at the nozzle, and the greater the product output, the more cost savings will be achieved by using hot runner. 2. The sprue material requires storage, crushing, and power consumption, which will reduce product quality and increase 1-2 manpower. The hot runner has no spout, which saves labor and has better product quality. 3. The three-plate mold is easily damaged due to the movem

January 31, 2024

International Market | North American automotive mold spending is expected to reach $8.3 billion in 2025

Harbor Results Inc. (HRI), a leading authority on the manufacturing industry, has released the results of Harbor IQ's in-depth study of the current state of the auto injection mould supplier. Analysis shows that North American automotive molds suppliers' mold spending will grow at an annual rate of 13.4% from 2022 to 2025, and spending in 2025 will reach US$8.3 billion, a significant increase from US$5.7 billion in 2022. Several key factors are driving the growth in tooling spending. First, even though demand for cars in North America fell from 15.8 million to 13.7 million, most

January 30, 2024

Future Development Trends of China's Mold Industry

Our country is gradually moving from a large injection mould production country to a strong mold manufacturing country. As far as the domestic market is concerned, both production and demand in the mold industry are booming, enterprises are enthusiastic about investment, and larger technological transformation projects and new projects continue to appear. In addition, the construction of industrial clusters continues to accelerate. With the support of government preferential policies, there are more than 100 mold cities (or mold parks, clustered production bases, etc.) of considerable scale ac

January 26, 2024

Mold Base Classification Introduction

According to the different glue feeding methods of the product, it is divided into: two-plate mold and three-plate mold. Two-plate Mold:

January 26, 2024

A Simple Picture to Let you understand the structure and composition of Injection Molds

Plastic injection mould is a processing method used in mass production of certain parts with complex shapes. The specific principle refers to: the heated and melted plastic material is pushed by the screw of the injection molding machine and injected into the cavity of the plastic mold at high pressure. After cooling and solidification, a plastic molded product is obtained. The plastic mold consists of two parts: a movable mold and a fixed mold. The movable mold is installed on the movable template of the injection molding machine, and the fixe

January 26, 2024

BMC Press Molding Process Method

BMC is the abbreviation of glass fiber reinforced unsaturated polyester thermosetting plastic, which is currently the most widely used type of reinforced thermosetting plastic. Characteristics and applications of BMC BMC has good physical, electrical and mechanical properties, so it has a wide range of applications, such as making mechanical parts such as intake pipes, valve covers, and common manhole covers and manhole rings. It is also widely used in Aviation mold, construction, Power Tools Mould, Home appliances mould, etc. that requir

January 26, 2024

Introduction to commonly used engineering plastics in the medical field

This article mainly introduces commonly used Medical Parts Mould plastics, which are composed of materials that are easy to process into shapes. These Medical Plastic Injection Moulding plastics tend to be costly relative to weight because most of the material is lost to debris during processing. 1. Acrylonitrile-butadiene-styrene (ABS) Terpolymer is made from SAN (styrene-acrylonitrile) and butadiene synthetic rubber. SAN (styrene-acrylonitrile) gives ABS its hardness and surface finish, and butadiene gives it toughness. Typically available in 4-inch-thick sheets

January 26, 2024

Equipment introduction: Babyplast Injection Molding Machine

Baby Plastic Micro Molding machine is suitable for all thermoplastic material injection molding, MIM (metal injection molding) and CIM (ceramic injection molding). The piston injection molding system consists of independent plasticizing and injection parts to ensure micro-injection (even the injection volume Precision injection (less than 0.1 grams); it also solves the problems of unstable injection volume and easy degradation of melted glue in traditional screw-type injection units during the micro-injection molding process. Main Application

January 25, 2024

What is Injection Molding?

Injection mould is a plastic manufacturing process that involves melting plastic polymers over a short period to create plastic parts. The technology solidifies molten plastic resin under pressure in a pre-machined mold, giving the part its shape. Injection moulding can help produce hundreds or thousands of products at a cost-effective price. Using this system, you can manufacture parts of varying shapes, including those with complex dimensions. The popularity of plastic mould in manufacturing today is no surprise. Plastic materials are now renowned in many industries for their affordab

January 25, 2024

Common Plastic Materials (1)

There are many types of plastics with different shapes, colors and properties. Different plastics have different properties and molding temperatures. Let`s take a look at common plastics and what their characteristics are. 1. Polyethylene (PE) It has excellent corrosion resistance and electrical insulation (especially high-frequency insulation). It can be chlorinated, irradiated, modified, and reinforced with glass fiber. Low-pressure polyethylene has higher melting point, rigidity, hardness and strength, low water absorption, good electrical properties and radiation resi

January 25, 2024

Common Plastic Materials (2)

Common Plastic Materials (2) 4. Polypropylene (PP) Low density, strength, stiffness, hardness and heat resistance are better than low-pressure polyethylene and can be used at around 100 degrees. It has good electrical properties and high-frequency insulation and is not affected by humidity, but it becomes brittle at low temperatures, is not resistant to molds and is prone to ageing. . Suitable for making general mechanical parts, corrosion-resistant parts and insulating parts, such as Outdoor product mold and Outdoor accessories mold. 5. Polystyrene

January 24, 2024

Learn about PEEK Materials

The full name of PEEK is poly (ether-ether-ketone). PEEK is a polymer composed of repeating units containing one ketone bond and two ether bonds in the main chain structure. They are special polymers and high performance materials. It has physical and chemical properties such as high-temperature resistance and chemical corrosion resistance. It is a type of semi-crystalline polymer material with a melting point of 334°C, a softening point of 168°C, and a tensile strength of 132~148MPa. It can be used as a high-temperature-resistant structural material and electrical insulation material. It ca

January 18, 2024

Hongke Mould 2019 Year-End Party

Hongke Mould 2019 Year-End Party On January 10, 2020, all employees of Hongke Mold gathered together to bid farewell to 2019 with singing and welcome 2020 with applause. In the new year, we will join hands to create greater glory!

January 18, 2024

Injection Mold Development Birection

Injection Mold Development Birection The status of high-precision manufacturing technology will become more prominent. By introducing advanced CNC processing

January 18, 2024

Quality First, On-Time Delivery, Utmost Customer Satisfaction

Quality First, On-Time Delivery, Utmost Customer Satisfaction

January 18, 2024

The Development Status And Future Trends Of The Mold Making Industry

The Development Status And Future Trends Of The Mold Making Industry

January 18, 2024

The Importance Of Precision Injection Molding in Medical Device Manufacturing

The Importance Of Precision Injection Molding in Medical Device Manufacturing In the medical precision inject

January 18, 2024

Three Situations That Must Be Paid Attention To During Injection Molding Process

Three Situations That Must Be Paid Attention To During Injection Molding Process Injection moulding processing is an industry with a wide range of knowledge and strong technical and practical req

January 18, 2024

Which Products Require Injection Molding?

Which Products Require Injection Molding? Auto: Auto is a major area of injection molding. From auto interior parts to exterior plastic parts, injection moldi

January 18, 2024

Multi-material Mould General Material Consolidation Type

Multi material injection molding products refer to plastic products in which two or more colors of materials or different materials are injection molded through more than one flow path. multicomponent injection molding products are injection molded from plastic materials of different co

January 18, 2024

Multi-color Multi-material Injection Molding Process

Mold Design In principle, there are two types of mold designs for multi-color and multi material injection molding. First, the mold has more than two rubber inflow channels, and the primary molded product is moved to another mold cavity through a rotating device (turntable or rotating bearing mechanism) or moving mechanism (manua